Construction Safety Checklists - Look at your workplace the way a safety inspector would

One of the major reasons construction sites contain so many safety hazards -- ones that are easily fixed -- is that people can "look right at them without seeing them."

Learn the foundation of workplace hazard identification

  • Two simple questions let you distinguish between conditions that are likely to lead to serious injuries and those that are "low risk"
  • Then you can spend your time where it's most important

Look at examples of what inspectors have cited

  • Most of these photos came from inspection files. They show what the inspectors saw & how they interpreted the situation

Look at what makes a good impression on an inspector

Read through a copy of the DOSH Inspection Checklist

See examples of what often causes the inspector to stop by your workplace to begin with

Have a DOSH Consultant look at your business. It's free!

End of main content, page footer follows.

Access Washington official state portal

© Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington.