| Respiratory Protection Standards |  | |
This is a list of the most frequently used standards with respiratory protection requirements, but it's not a complete list for all WISHA standards.
While these requirements are viewed as being "supplemental" to the requirements specified in the main respiratory protection standard, WAC 296-62 Part E, they may, at times, preempt some of the requirements in the main standard if noted.
Abrasive Blasting WAC 296-24-67515
Acrylonitrile WAC 296-62-07336 see section (8)
Agriculture WAC 296-307-11010 , WAC 296-307-13045 see section (3)(I)
Anhydrous Ammonia WAC 296-24-51009 see section (10)
Arsenic (inorganic) WAC 296-62-07347 see section (8)
Asbestos WAC 296-62-07715
Benzene WAC 296-62-07523 see section (7)
Beryllium (welding) WAC 296-24-71515
Butadiene WAC 296-62-07460 see section (8)
Cadmium (construction) WAC 296-155-174 see section (7)
Cadmium (general industry) WAC 296-62-07413
Cadmium (welding, general industry) WAC 296-24-71517
Carcinogens (general) WAC 296-62-07306 see sections (2)(d)(iv) & (v)
Coke Ovens WAC 296-62-20011
Concrete Finishing WAC 296-155-683 see section (4)
Cotton Dust WAC 296-62-14533 see section (6)
DBCP WAC 296-62-07342 see section (8)
Emergency Response WAC 296-824
Ethylene Oxide WAC 296-62-07367
Fire Brigades WAC 296-811-40015
Fire Fighters WAC 296-305-04001 , WAC 296-305-02501 see section (15) , WAC 296-305- 03001 , WAC 396-305-05001 , WAC 296-305-05003
Formaldehyde WAC 296-62-07540 see section (7)
Hazardous Waste Operations WAC 296-843-190
Lead (construction) WAC 296-155-17613
Lead (general industry) WAC 296-62-07521 see section (7)
Mercury (welding) WAC 296-24-71519
Methylene Chloride WAC 296-62-07470 see section (7)
Methylenedianiline (construction) WAC 296-155-17317
Methylenedianiline (general industry) WAC 296-62-07615
Preservative Coatings (welding) WAC 296-24-722 see section (3)(a)
Thiram WAC 296-62-07519 see sections (3)(c)(vi) & (x)
Tunnels & Shafts WAC 296-155-730 see section (7)
Vinyl Chloride WAC 296-62-07329 see section (7)
