This checklist is designed to be generic in content and may not include all requirements for your particular installation.

Checklist for homeowners on how to upgrade their pre-HUD homes to approach the HUD standards in the area of fire safety.

Checklist for homeowners on how to upgrade their pre-HUD homes to approach the HUD standards in the area of fire safety.

The purpose of the manufactured home roof affidavit is to provide timely inspections and communications between the contractor and/or owner and FAS inspectors and field staff.

A structural inspection request questionnaire will not be required when a roof change out occurs if no structural changes are made in the roof sub-surface and roof cavity. Example: Repairing or replacing the roof trusses, rafters, ridge beam and the replacement of not more than (4) 4’x 8’ of roof sheathing.

This checklist is used by the contractor when altering a polybutylene re-pipe. Be sure you can answer YES to all questions before calling L&I for an inspection.

Checklist used by the contractor when altering a low slope roof.

This checklist is used by the contractor when installing gas lines with copper tubing. Be sure you can answer YES to all questions before calling L&I for an inspection.

This document shows the steps to decertify a manufactured or mobile home.

This checklist is generic in content and may not include all requirements for your particular installation. The manufacturer's installation instruction must be adhered to and available to the inspector at the time of the inspection.

Used by a homeowner or contactor to request a field inspection for an alteration to a manufactured or mobile home.

Checklist on how to repair a flood damaged manufactured home. After the contractor has done all that is required by the checklist they call L&I for an inspection.

You fill out, print and make a copy of this form on your company's letterhead. This affidavit must be available for the L&I inspector when the inspection is made.

This checklist is used by the contractor when installing gas room heaters. Be sure you can answer YES to all questions before calling L&I for an inspection.

This variance request applies only to the installations performed by a previous owner and does not apply to any home during the warranty period.

If your home has any of the items in this document, it is a manufactured / mobile home and requires inspections for all alterations by L&I's Factory Assembled Structures Section.

This checklist is designed to be generic in content and may not include all requirements for your particular installation.

Manufactured Home Installer Certification Tag Order form

Manufactured Home Installer Certification Tag Transfer Request form

Manufactured Home Installer's Monthly Certification Tag Report

For use on sidewalls only. Maximum of one new opening up to 11-6 wide per sidewall. Edge of opening to be no closer than 4 from end of sidewall.

This checklist is used by the contractor when installing steel or wrought-iron gas line. Be sure you can answer YES to all questions before calling L&I for an inspection.

Structural Inspection Request Questionnaire

This checklist is designed to be generic in content and may not include all requirements for your particular installation.

Pamphlet/booklet: Covers things you should consider when altering your home. Defines what is meant by alteration, repair and replacement and includes tips for hiring a registered contractor. It also includes contact information for L&I Consumer Assistance Program for owners of new manufactured/mobile homes.

Pamphlet/booklet: Covers things you should consider when altering your home. Defines what is meant by alteration, repair and replacement and includes tips for hiring a registered contractor. It also includes contact information for L&I Consumer Assistance Program for owners of new manufactured/mobile homes.