Ladders, Portable and Fixed

Chapter 296-876, WAC

Effective Date: 12/01/06

Contents
Helpful Tools
Index
Download

WAC 296-876-500

Fixed ladder design and construction

For printing

Your Responsibility:

To make sure fixed ladders installed on or after December 1, 2006, meet the design and construction requirements

Design and construction-Fixed ladders installed on or after December 1, 2006

WAC 296-876-50010

Design and construction-Fixed ladders installed on or after December 1, 2006

You must

  • Make sure fixed ladders installed on or after December 1, 2006, meet the design and construction requirements of ANSI A14.3-2002, American National Standard for Ladders-Fixed-Safety Requirements.

    Note

    Note:

    • Ladders will be considered to have met the requirements of this section if they meet the design and construction requirements of ANSI A14.3, American National Standard for Ladders-Fixed-Safety Requirements, in effect at the time they are installed.


End of main content, page footer follows.

Access Washington official state portal

© Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington.