Benzene Training Kit - Instructor's Guide

Purpose of This Training Module

Instructor's Guide for printing
(165 KB PDF)

You may use this slide presentation to comply with the training requirements of the WISHA Benzene regulations (WAC 296-849). You can read the training requirements in the rule at the end of this guide.

The topics covered in this module are those required in the rule. However, you may use different materials that cover these topics if you believe that they will be more effective.

Getting Ready

1. Resources and materials you will need:

  • A quiet room with basic accommodations for comfort of participants.
  • A copy of the presentation (computer slide show, overheads, or handouts).
  • Overhead projector or computer and projector for Powerpoint presentation.
  • Copies of the handouts (optional).
  • Personal protection used at your worksite (recommended).
  • Certificates to hand out to the class as proof of attendance (optional).
  • A training roster to pass around for your records (recommended).

2. Review the presentation materials

Take the time to look through each of the slides and read the instructor's notes that come with each slide. If you have any questions after looking through these materials, you can contact your local L&I office (see page 3) for assistance before you give your first presentation.

3. Customizing the presentation

  • The information contained in this module applies to all workplaces. However, you are also required to include information about conditions that exist at your workplace. Slides # 5, 9, 10, 12, 16, 20 and 24 provide a place to include that information. Just using the training module without the workplace-specific information will not satisfy all training requirements.
  • If you have PowerPoint on your computer, additional information is easily added to the PowerPoint version after downloading. The PowerPoint version can be modified, but modification that changes the essential meaning or deletes information may not meet the training requirements.
  • If you use the PDF version, the slides cannot be changed, but you can provide the workplace specific information orally, on overhead transparencies or as paper handouts.

4. Prepare the materials and schedule the class

  • If you have a computer video projection system, all you need to do is check to make sure the presentation works and make copies of the handouts.
  • If you plan to use an overhead projector, print the slides out on transparencies. The PDF version will print quicker and use less printer memory. The slides will be clearer if they are printed in color. If you don't have a color printer, your local print or copy store can print out color transparencies for you.

  • Schedule the class for a date and time convenient to most people. If you want many employees and supervisors to participate, try not to make groups larger then 15 attendees.

Presenting the Training

Give the presentation
You can use your own words rather than just reading from the script. You can also make three-slide-per-page handouts of the training.

Ask for participation
It also helps to involve the audience as much as possible by asking them questions and getting them to talk about their own jobs, their exposure to benzene, use of respirators and any suggestions they may have on how to reduce benzene exposure.

Questions and answers
Answer any questions the best that you can. Even if you don't have the technical knowledge to answer a lot of questions on benzene, you can still answer the important questions about the way that your company is addressing employee exposure to arsenic. If any questions on benzene are asked that you need help answering, you can contact your local L&I office listed on the following page.

Follow-up

Within a week or two of giving the training, you might want to take a few minutes to talk to some of the employees and supervisors to make sure they understood what was presented and how it applies to them.

Getting help

If you have questions while preparing to give this presentation, or if questions come up during the presentation that you need help in answering, contact your local L&I office listed below for assistance:

City Telephone # E-mail address
Everett 425-290-1300 dres235@lni.wa.gov
Seattle 206-515-2800 solt235@lni.wa.gov
Spokane 509-324-2600 poag235@lni.wa.gov
Tacoma 253-596-3800 solt235@lni.wa.gov
Tumwater 360-902-5799 coor235@lni.wa.gov
Wenatchee 509-886-6500 mcfj235@lni.wa.gov

Training Requirements in the Benzene Rule

WAC 296-849-11050, Training

You must
  • Provide training and information to employees:
    • At the time of initial assignment to a work area where benzene is present
      and

    • At least every 12 months after initial training for employees exposed to airborne concentrations at or above the action level (AL) of 0.5 parts per million (ppm).
  • Make sure training and information includes all of the following:
    • Specific information on benzene for each hazard communication training topic. For the list of hazard communication training topics, go to the Safety and Health Core Rules, chapter 296-800 WAC, and find Inform and train your employees about hazardous chemicals in your workplace, WAC 296-800-17030
      and
    • An explanation of the contents of each of the following and guidance about where to find a copy:
      This chapter,
  • The following found in another chapter, the General Occupational Health Standards, chapter 296-62 WAC:

Reference:

 

End of main content, page footer follows.

Access Washington official state portal

© Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington.