Split (Multipiece)
Rim and Single-Piece Rim Wheels
Chapter 296-864, WAC
|
Effective
Date: 02/01/05 |
Contents
Helpful Tools
Index
Download
Use this optional form to help you document
that each employee has received and demonstrated training as required
by WAC 296-864-60010,
Make sure employees demonstrate and retain the ability to service
rim wheels safely.
Employee name _____________________________________________________
Trainer name(s) _____________________________________________________
Date ______________________________________________________________
Additional comments:
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
All Rim Wheels
Indicate if the employee has completed the
required training.
Responsibility
|
Training
Completed |
Trainer's
Initials |
The applicable
data from the charts (rim manuals) |
|
|
The contents
of chapter 296-864 WAC, Split Rims |
|
|
Correct
procedures of servicing the type of wheel being worked on
|
|
|
The procedures
described in WAC 296-864-400, Service split rim wheels safely
|
|
|
The procedures
described in WAC 296-864-500, Service single-piece rim wheels
safely |
|
|
Comments:
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Split Rim Wheels
Indicate if the employee has demonstrated
the task for the items listed below. When you complete all of
the listed tasks, you have met the training requirements for split
rim wheels.
Task
|
Task
Demonstrated |
Trainer's
Initials |
Demounting
and deflation of tires
|
|
|
Inspection
and identification of the rim wheel components
|
|
|
Mounting
of tires
|
|
|
Inflation
of tires with a restraining device or other safeguard required
by this section
|
|
|
Use
of the restraining device or barrier, and other equipment
required by this section
|
|
|
Handling
of rim wheels
|
|
|
An
understanding of the necessity of standing outside the trajectory:
- During inflation of the tire
- During inspection of the rim wheel following inflation
and
- Installation and removal of rim wheels
|
|
|
Comments:
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Single-Piece Rim Wheels
Indicate if the employee has demonstrated
the task for the items listed below. When you complete all of
the listed tasks, you have met the training requirements for
single-piece rim wheels.
Task |
Task
Demonstrated |
Trainer's
Initials |
Demounting
and deflation of tires
|
|
|
Inspection
and identification of the rim wheel components |
|
|
Hazards
of mixing 16" and 16.5" tires and rims
|
|
|
Mounting
of tires
|
|
|
Inflation
of tires with a restraining device or other safeguard required
by this section
|
|
|
Use of the
restraining device or barrier, and other equipment required
by this section
|
|
|
Handling
of rim wheels
|
|
|
Inflation
of the tire when a rim wheel is mounted on a vehicle |
|
|
An understanding
of the necessity of standing outside the trajectory:
- During inflation of the tire
- During inspection of the rim wheel
following inflation
and
- Installation and removal of
rim wheels
|
|
|
Comments:
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
|
For
modifying