Chemical & Biological Hazards Project

 

Identifying Hazards - Lofgren, D. J., Reeb-Whitaker, C. K., & Adams, D. (2010). Surveillance of Washington OSHA exposure data to identify uncharacterized or emerging occupational health hazards. Journal of Occupational and Environmental Hygiene, 7(7), 375-388. URL: http://dx.doi.org/10.1080/15459621003781207.

Carbon Monoxide - Reeb-Whitaker, C. K., Bonauto, D. K., Whittaker, S. G., & Adams, D. (2010). Occupational carbon monoxide poisoning in Washington State, 2000-2005. Journal of Occupational and Environmental Hygiene, 7(10), 547-556. URL: http://dx.doi.org/10.1080/15459624.2010.488210.

Isocyanate prevention - Reeb-Whitaker, C., Anderson, N. J., Bonauto, D.K. (2013)  Prevention Guidance for Isocyanate-Induced Asthma Using Occupational Surveillance Data.  J. Occ. & Env. Hyg, 10:597-608.  URL:  http://dx.doi.org/10.1080/15459624.2013.818236.

Isocyanate exposures - Reeb-Whitaker, C., Whittaker, S. G., Ceballos, D. M., Weiland, E. C., Flack, S. L., Fent, K. W., Thomasen, J. M., Trelles Gaines, L. G., & Nylander-French, L. A. (2012). Airborne isocyanate exposures in the collision repair industry and a comparison to occupational exposure limits. Journal of Occupational and Environmental Hygiene, 9(5), 329-339. URL: http://dx.doi.org/10.1080/15459624.2012.672871.

Isocyanate analytical methods - Ceballos, D. M., Whittaker, S. G., Yost, M. G., Dills, R. L., Bello, D., Thomasen, J. M., Nylander-French, L. A., Reeb-Whitaker, C. K., Peters, P. M., Weiland, E. C., & Suydam, W. W. (2011). A laboratory comparison of analytical methods used for isocyanates. Analytical Methods, 3(11), 2478-2487. URL: http://dx.doi.org/10.1039/c1ay05225j.

Isocyanates and protective clothing - Ceballos, D. M., Yost, M. G., Whittaker, S. G., Reeb-Whitaker, C., Camp, J., & Dills, R. (2011). Development of a permeation panel to test dermal protective clothing against sprayed coatings. Annals of Occupational Hygiene, 55(2), 214-227. URL: http://dx.doi.org/10.1093/annhyg/meq081.

Isocyanate surface detection - Ceballos, D. M., Yost, M. G., Whittaker, S. G., Camp, J., & Dills, R. (2009). Objective color scale for the SWYPE surface sampling technique using computerized image analysis tools. Journal of occupational and environmental hygiene, 6(10), 604-611. URL: http://dx.doi.org/10.1080/15459620903117710.

Isocyanates and glove use - Ceballos, D., Reeb-Whitaker, C., Glazer, P., Murphy-Robinson H., and Yost, M.  (2014).  Understanding factors that influence protective glove use among automotive spray painters.  J of Occ Env Hyg 11(5): 306-313.  URL:  http://dx.doi.org/10.1080/15459624.2013.862592.

Dermal protection in collision repair - Ceballos, D. M., Fent, K. W., Whittaker, S. G., Gaines, L. G. T., Thomasen, J. M., Flack, S. L., Nylander-French, L. A., Yost, M. G., & Reeb-Whitaker, C. K. (2011). Survey of dermal protection in Washington State collision repair industry. Journal of Occupational and Environmental Hygiene, 8(9), 551-560. URL: http://dx.doi.org/10.1080/15459624.2011.602623.

Health and safety needs in collision repair - Whittaker, S. G., & Reeb-Whitaker, C. (2009). Characterizing the health and safety needs of the collision repair industry. Journal of occupational and environmental hygiene, 6(5), 273-282. URL: http://dx.doi.org/10.1080/15459620902775609.

 

 

End of main content, page footer follows.

Access Washington official state portal

   © Washington State Dept. of Labor & Industries. Use of this site is subject to the laws of the state of Washington.

Help us improve